How to Measure a Box

To get the most accurate estimate when ordering a retail packaging  folding carton box, use this as a guideline to give the correct measurements.

ALWAYS MEASURE THIS WAY:
1. Length (L) x 2. Width (W) x 3. Depth (D)

Which way is length?

1. LENGTH
Sit the package on its Tucks. Face the front of the package in front of you. Length of the face panel (usually the main graphic panel) is measured right to left, score to score of that panel only.

2. WIDTH
Sit the package on its Tucks. Face the front of the package in front of you. Length of the face panel (usually the main graphic panel) is measured right to left, score to score of that panel only.

Note:  The length and width are always meausred on the box openning  direction.

3. DEPTH (HEIGHT)
Depth of package is last. The “load” dimension of the product.

measure the box length width and depth

How to Create a Dieline

Here we explain the basics of dielines and how to create one in Illustrator from a pre-existing package. For this tutorial, I used a small gum pack. A dieline is a flattened outline of the cut and fold lines for a package; it serves as a template. Designers often receive dielines from their printer; however, if your client wants a new style of package or a package structure for which the printer does not have a template, you might need to create one from scratch. If the client gives you a package to use, it’s pretty easy to scan it in and create dielines over it in a program such as Illustrator.

handmade-packaging-creating-a-dieline-1

Setting up your file

Create a new file in Illustrator big enough to hold your dieline, PMS swatches, and design notes.

setting up your file

Creating layers

Create four layers: one titled “Dieline”, one “Artwork,” one “Original package” and one “Notes.” Your Dieline layer should be on top.

creating layers

Make a template layer

When you create the Original package layer, check the Template option. This will allow you to always see the original packaging, but as a light tint so that you can clearly see your dieline and new artwork in the foreground.

make-a-template-layer

Placing your artwork

For this small template, I used an 11 × 81⁄2in (28 × 21.6cm) artboard. Gently open out your package and scan it. Place this scan on the Original package layer and then lock that layer by clicking on the padlock icon.

 

placing your artwork

Drawing lines

Use either Shapes or the Pen tool, whichever you are most comfortable with, to draw your guidelines. Either is fine, as long as you are making clean, accurate lines.

 

drawing lines

Check measurements

When you work from a pre-existing template, you’ll need to check your accuracy by taking measurements from your template and comparing them to the in-progress dieline.

 

check-measurements

Cut lines

Cut lines are indicated with solid red lines, typically .25 or .50pt.

 

cutlines

Fold lines

Folds are indicated with solid or dotted red lines. (I use dotted lines in this tutorial.)

 

fold-lines

Safe margin lines

Safe margins are shown either with guides or blue lines.

 

safe-margin-lines

Labels

Identifying labels, such as “Front Panel,” “Glue Panel,” “Tuck Flap,” etc., should be put on your Notes layer.

 

labels

Lock Original package layer

Once you have created your dielines, lock that layer by clicking the padlock icon.

 

lock-original-layer

Creating a prototype

Once you have a basic dieline, you can place your art on the Artwork layer. Create a hardcopy prototype of your package by printing out and assembling your design.

 

creating-a-prototype

This will show you any errors in orientation, measurement, text or art placement and give you the opportunity to fix them. Once your dieline is ready, send it to the printer and ask for a proof. If you receive this in digital rather than printed form, print and assemble it in order to check one last time for orientation, spelling, placement errors, and so on. If you can’t print out your dieline to full size, assembling a miniature version will work as, by this point, your measurements should be perfect.

ISTA 1A Test for the Corrugated Shipping Cartons

ISTA 1A test is widely used to assured the carton box quality during the transportation. In DePrintedBox, we have a series of test to make sure of the box quality. However, the clients can also apply a ISTA 1A test for the printed box to be 100% sure the package is perfect for their needs. The test will be implemented by the certified institutes and be charged a certain fee to the clients.Below is a short introduction to the ISTA test.

1. What does ISTA refer to?

International Safe Transit Association (ISTA) is an organization focused on the specific concerns of transport packaging and is dedicated to develop and deliver standards packaging systems.

2. What is ISTA 1A test for the corrugated package?

ISTA 1A test is designed to make sure that the corrugated package can withstand the transport hazard. With the test properly applied, the ISTA procedure can provide the tangible benifit of

• Shortened carton development time and confidence in product launch
• Protection of products and profits with reduced damage and product loss
• Economically balanced distribution costs
• Customer satisfaction and continued business.

3. There are three sections: Overview, Testing and Report

Overview provides the general knowledge required before going into the testing laboratory and
Testing presents the specific instructions to do the testing in the laboratory and
Report indicates what data shall be recorded to submit a test report to ISTA.

4. Two systems of weights and measures are presented in ISTA test procedures.

They are the English system (Inch-Pound) and the international system SI (Metric). Inch-Pound units are shown first with Metric units in brackets, except in some tables where they are shown separately.

• Either system may be used as the unit of measure (standard units), but
• The standard units chosen shall be used consistently throughout the procedure.
• Units are converted to two significant figures and
• Not exact equivalents.

For more information, please refer to the official doc from ISTA

http://www.ista.org/forms/1Aoverview.pdf