A Paper Aarchitecture Pavillon Made With ‘Bricks’ of Pizza-boxes

Recently we got an inquiry about a paper architecture Pavillon made with ‘bricks’ of
pizza-boxes, which is quite interesting. Maybe you like it.

paper printed box

Architecture Pavillon made with ‘bricks’ of

I am a Professor of Architecture Design at the Department of
at the University of Florence.

Our school has been invited to exhibit an installation at “Future Lab”
international education fair
that will be held at Westbund, Shanghai from November 25th till December
4th > ade-futurelab.com

We have conceived a paper architecture Pavillon made with ‘bricks’ of
pizza-boxes cardboard type, 2 mm thick, folded and with slits.

If you check the attached images it’s easy to understand the building

The pdf shows how we can have three stripes of cardboard out from a
(almost) A0 pizza-boxes cardboard type sheet.

Every stripes should folded 3 times, each one should have 8 slits/cuts.

If the pizza-boxes cardboard type comes in white we would foresee to
print a pattern of architecture plans on the elements, in black (the
circles in the pdf shows the possible position of the prints).

If the pizza-boxes cardboard type comes in brown we would foresee to
print a pattern of architecture plans on the elements, in red (check the
last jpeg as an example of the prints)

We are Kindly asking to Shanghai DE Printed Box if it is possible to
produce those elements, if it is possible in case to have it done by the
next November 23rd and to quote the entire process.

We would be in need of 100/150 A0, printed, cut, folded.

The order would be placed by the Italian Consulate in Shanghai.

I understand the schedule it’s tight but we look forward to hear from
you soon.

Best regards,

IMPORTANT NOTE: THIS creative idea and copyright is owned by  the Professor of Architecture Design at the Department of
at the University of Florence.

Custom Paper Box With Spot UV and Embossing

This article is about a coffee paper box know as Ue Coffee Roasters pod box with the details below.

custom paper box with spot UV

Spot UV and Embossing for the logo UE COFFEE ROASTERS

Below is the artwork file for what will be known as the Ue Coffee Roasters pod box. The artwork shows the embossed area which is the UE COFFEE ROASTERS in magenta which needs to be embossed and then spot UV added to this area only. The paper printed box will also need a matte laminate applied so that it sits perfectly alongside the other retail paper box of the company.

The artwork of the custom paper box should be self-explanatory but here are the instructions just in case anything does not make sense;

paper printed box with spot UV and embossing finish

The coffee paper box has the logo spot UV varnished and embossed.

  • Box dimension 282mm x 38mm x 38mm (internal dimensions)
  • Reverse tuck end both ends
  • 500 micron white back folding boxboard
  • Emboss to one panel (UE COFFEE ROASTERS coloured magenta on artwork)
  • Spot UV varnish same area as embossing
  • Two colour print to outside (cyan and black)

Quote For Box Similar iPhone Style Box

iphone box style custom paper box

Custom Paper Box Similar to the iPhone Box.

I read your article in the link below and am looking for something similar.

I am looking for a custom paper box which will hold a 10ml essential oil bottle and want it to quality packaging like the iPhone box and also the box shown in the links below
As the video shows, it is a two part rigid box where the bottom part has a shoulder which the top part slides into and closes together with a flush fitting. The dimensions of the box when closed is as below
length 13cm
width 9cm
height 5 cm when closed so each half will measure 2.5cm but the bottom part will have a raised shoulder (this raised shoulder is 1.2 cm on the Byredo box).
As per the iPhone box the bottom half will be reinforced cardboard, the Byredo box which I have measured is 2.5mm thick on the outside box and the internal shoulder is about 2mm.
This colour is matt white as per both the iPhone and Byredo boxes.
The bottom part of the box which holds the bottle will be a cardboard inlay as per the Byredo box.
A logo will be needed on the top face of the top part and possibly on the sides as per an iPhone box.  This could be a debossed logo on the top or hot foil as per your example in the link. This is not needed for the initial quote but if possible, please provide usual costs involves with printing of logos, debossing and hot foil printing.
Please quote a price for your minimum order quantity but this could run into tens of thousands if successful.
I am based in the UK so you can quote your delivery fees.
I trust that I have provided enough information so that you can provide a quote.  If it saves time, please quote a rough figure for your curlymylash.com box in the link on your website and then I can provide more detailed specifications if this is acceptable.
Many thanks for your help and assistance in this matter.
Best regards